Owning a home can require a few projects along the way. To keep up with the many maintenance projects, a simple checklist of what to do and when to do it would be helpful. As the traffic of people and pets in your home increases, so does the potential for touching up your walls. Unfortunately, not all homeowners enjoy fixing dents in their walls. Wondering how to fix a dent in the wall? This is an easy task for any homeowner. You just need to have the required tools and materials.
Let’s take a look below at the steps needed to fix the dent in the wall.
What Will I Need?
Whenever you are attempting a project, you will need to purchase some tools and equipment. This project is no different. If you are lucky enough to already have the tools, then you can save some money by just purchasing the materials to complete the fixing of the dent. Let’s take a look below at what is needed.
- Waterproof primer
- Dust mask
- Putty knife
- Joint compound
- Utility knife
What Are The Steps?
Having instructions to guide you through a project like fixing a dent in your wall is important. Let’s take a look below at the recommended steps for this project.
- Prepare the wall – Make sure that the work space s free and clear from anything that can get in your way. Use a damp cloth to wipe the area clean. This allows the compound to adhere to the wall easier.
- Carve it out – Using the utility knife, gently carve out an area of drywall that is around the dent. Create a hole by carving about an inch around the area of the dent.
- Sand it down – Sand down the area of the hole so that the joint compound can properly affix to the drywall.
- Apply a waterproof primer – Seal the drywall where the dent is located with a waterproof primer.
- Apply the joint compound – Using your putty knife, fill the hole with the joint compound. Smoothing it out across the wall allows it to stick to a wider area.
- Let it dry – Give the joint compound 24 hours to adhere to the drywall.
- Sand the area – Sand down the area so that the surface is smoothly joined against the original drywall.
- Paint the patch – Take the touch-up paint that you have from your original paint job and paint over the patch. Smooth your paint out so that it blends nicely with the original wall. This ensures the wall is as good as new.
Other Recommended Maintenance
Now that you have an idea of how to fix the dent in your wall, you can read up on how to fill the gaps between your baseboards and the floor. This would require caulking. Be sure to read up on this topic so that you have expert knowledge of how to fill the gaps.
Next, inspect your drywall for dampness. Before patching the dent, determine why the dent is there in the first place. This could be drywall that got wet and is now structurally flawed. Read up on if you need to replace wet drywall, or if you can just patch it.
Lastly, if you are working on filling in dents in your walls, it is likely that other areas of your home might need updating. For example, the bathroom ceiling might be ready for a fresh coat of paint. This project could be accomplished shortly after you patch your wall dents.
When Do I Call A Professional?
The only reason for you to call on a professional for assistance with this project is a lack of time and tools. Most homeowners have the capability of patching a dent or hole in the wall with a simple joint compound application. However, if you aren’t keen on the do-it-yourself idea, reach out to a local handyman. Also, to ensure that no additional repairs are needed, reach out to your local home inspection team.
Repairing a dent in your wall is a simple project. You simply need the tools, the time, and the patience. Hiring a local professional contractor is a good idea if you do not have the time to complete this project. However, it is recommended that call your local home inspection team to ensure that the dent in the wall was not caused by other structural concerns. Reach out to Alpha Building Inspectors who can check your walls and wall dents during a home inspection in the Merrimack, New Hampshire area.